http://www.sanken-ele.co.jp sanken electric ? may. 20 11 the information included herein is believed to be accurate and relia ble. however, sanken electric co., ltd assumes no responsibility for its use ; nor for any infringements of patents or ot her rights of third parties that may result from its use. copy right: sanken electric co.,ltd. page 1 features ? low on-state resistance 5.0m vgs=10v ? built-in gate protection diode ? smd pkg package to220s applications ? dc dc converter ? mortar drive internal equivalent circuit key specifications ? v(br)dss = 60v (id=100ua) ? rds(on) = 5m max (id=35a / vgs=10v) absolute maximum ratings (ta=25 c characteristic symbol rating unit drain to source voltage v dss 60 v gate to source voltage v gss 20 v continuous drain current i d 85 a pulsed drain current i d(pulse) * 170 a maximum power dissipation p d 1 0 0 (tc=2 5 c ) w single pulse avalanche energy e as *2 400 mj maximum avalanche current i as 25 a channel temperature t ch 150 c storage temperature t stg -5 5 ~ +1 5 0 c maximum drain to source dv/dt 1 dv/dt 1 *2 0 .5 v/ns peak diode recovery dv/dt 2 dv/dt 2 *3 3 v/ns peak diode recovery di/dt di/dt *3 100 a/s *1 pw 100sec. duty cycle 1 *2 v dd =20v, l=1mh, i l =25a, unclamped, rg= 50 see fig.1 *3 i sd =25a see fig.2 (1) (3) (2) downloaded from: http:///
http://www.sanken-ele.co.jp sanken electric ? may. 20 11 the information included herein is believed to be accurate and relia ble. however, sanken electric co., ltd assumes no responsibility for its use ; nor for any infringements of patents or ot her rights of third parties that may result from its use. copy right: sanken electric co.,ltd. page 2 electrical characteristics (ta=25 c characteristic symbol test conditions limits unit min typ max drain to source breakdown voltage v (br)dss i d =100a v gs =0v 60 v gate to source leakage current i gss v gs =15v 10 a drain to source leakage current i dss v ds =6 0v v gs =0v 100 a gate threshold voltage v th v ds =10v, i d =1ma 2.0 3.4 4.0 v forward transconductance re(yfs) v ds =10v i d =35a 30 80 s static drain to source on-resistance r ds(on) i d =35a, v gs =10v 5.0 6.0 m input capacitance c iss v ds =10v v gs =0v f=1mhz 8400 pf output capacitance c oss 1200 reverse transfer capacitance c rss 930 turn-on delay time t d(on) i d =35a v dd = 20 v r g =22 r gs =50 r l =0.57 v gs =10v see fig.3 160 ns rise time t r 170 turn-off delay time t d(off) 430 fall time t f 185 source-drain diode forward voltage v sd i sd =50a v gs =0v 0.9 1.5 v source-drain diode reverse recovery time trr i sd =25a i/dt=50a/s 65 ns thermal resistance junction to case rth(ch- c) 1.25 c /w thermal resistance junction to ambient rth(ch- a) 62.5 c/w downloaded from: http:///
http://www.sanken-ele.co.jp sanken electric ? may. 20 11 the information included herein is believed to be accurate and relia ble. however, sanken electric co., ltd assumes no responsibility for its use ; nor for any infringements of patents or ot her rights of third parties that may result from its use. copy right: sanken electric co.,ltd. page 3 characteristic curves (tc=25 c ) 0 20 40 60 80 100 0.0 0.5 1.0 1.5 id (a) vds (v) id -vds characteristics (typical) 6v 8v 10v vgs =5v 0 20 40 60 80 100 0 2 4 6 8 id (a) vgs (v) id -vgs characteristics (typical) vds=10v tc = 150 25 - 55 0 2 4 6 8 10 12 - 75 - 50 - 25 0 25 50 75 100 125 150 rds(on) (m ) tc ( ) rds(on)-tc characteristics (typical) id=35a vgs=10v 0 1 2 3 4 5 6 7 0 20 40 60 80 100 rds(on) (m ) id (a) rds(on)-id characteristics (typical) vgs=10v 0.0 0.5 1.0 1.5 1 10 100 vds (v) vgs (v) vds-vgs characteristics (typical) id=70a id=35a id=100a 1 10 100 1000 1 10 100 re(yf s) (s) id (a) re(yfs)-id characteristics (typical) tc = 150 25 - 55 downloaded from: http:///
http://www.sanken-ele.co.jp sanken electric ? may. 20 11 the information included herein is believed to be accurate and relia ble. however, sanken electric co., ltd assumes no responsibility for its use ; nor for any infringements of patents or ot her rights of third parties that may result from its use. copy right: sanken electric co.,ltd. page 4 characteristic curves (tc=25c) 100 1000 10000 100000 0 10 20 30 40 50 capacitance (pf) vds (v) capacitance-vds characteristics (typical) crss vgs=0v f=1mhz coss ciss 0 20 40 60 80 100 0 0.2 0.4 0.6 0.8 1 1.2 1.4 idr (a) vsd (v) idr- vsd characteristics (typical) vgs=0 v tc = 150 - 55 25 0 20 40 60 80 100 120 0 50 100 150 pd (w) ta ( ) pd -ta characteristics (typical) with infinite heatsink without iheatsink 0.01 0.1 1 10 0.0001 0.001 0.01 0.1 1 10 r th(ch-c) ( /w) pw (sec) transient thermal resistance - pulse width single pulse downloaded from: http:///
http://www.sanken-ele.co.jp sanken electric ? may. 20 11 the information included herein is believed to be accurate and relia ble. however, sanken electric co., ltd assumes no responsibility for its use ; nor for any infringements of patents or ot her rights of third parties that may result from its use. copy right: sanken electric co.,ltd. page 5 fig.1 unclamped inductive test method ( ) test circuit (b) waveforms fig.2 diode reverse recovery time test method ( ) test circuit (b) waveforms fig.3 switching time test method v dd i l v ds r g l v gs 0v e as = 2 1 ? l ? i lp 2 ? dd (br)dss (br)dss v v v ? v (br)dss v dd dv/dt 1 i l i lp i s d l v d d d . u . t r g v gs 0v v d s dv/dt 2 i sd i rm trr di/dt v dd v sd i d r g r l p.w.= dy cycleQ% v ds v dd r gs 0v v gs t d(on) t r t on t d(off) t f t off 90% 10% 90% 10% v gs v ds ( ) test circuit (b) waveforms downloaded from: http:///
http://www.sanken-ele.co.jp sanken electric ? may. 20 11 the information included herein is believed to be accurate and relia ble. however, sanken electric co., ltd assumes no responsibility for its use ; nor for any infringements of patents or ot her rights of third parties that may result from its use. copy right: sanken electric co.,ltd. page 6 outline to220s weight approx. 1.4g (1 ) (2 ) (3 ) (1) gate (2) drain (3) source downloaded from: http:///
|